Ooni Pro – Unboxing: When you buy the Ooni Pro, what is in the box? Find out below.
Step one, place the large (60x33x80cm) and fairly heavy (29KG) box on a table.
Remove the Ooni Pro box from the outer box.
Put the box on it’s side and slide the Ooni Pro out – This wasn’t easy, see if someone can help you.
Place the Ooni Pro flat and move the box to the side.
So many boxes. They make maximum use of space inside the Ooni Pro so have a good root around inside to make sure you get them all. Some of the boxes are empty, I would guess this is to fill all the space to stop bits moving around during transit.
Boxes opened, you can see the empty ones at the top. I have stuck some tags against everything else.
Take the plastic off the Ooni Pro.
The Ooni Pro has three legs underneath. Two at the front and one at the back. Fold them out so the Ooni Pro stands up.
Install the chimney, it has a lip at the front and a clip at the back.
Put the four pizza stones inside.
Fit one of the doors. This is the door with thermometer. If you are cooking with gas fit the pizza door instead. Hatch door fitted on the back too.
Ready to go!
With the Pizza Door fitted.
The lineup: Uuni 2S, Ooni Pro and Uuni 3.
Unpacking the Ooni Pro you realise how big it is but also how substantial the components are. It feels much higher quality than the Uuni 2S/3 but is also a lot easier to put together as you just fold the legs out, clip the chimney on, put the pizza stones in and put the door on. From placing the box down to having it fully built took 15 minutes and that included taking all these photos.
Buying the Ooni Pro:
You can buy the Ooni Pro from Amazon: